1.3.1 バイナリ配布ソース

App Managerは、以下のソースを使用して配布されています。非公式なソースは、App Managerの修正されたバージョンを配布する可能性があり、 そのようなバージョンを使用した結果について、一切の責任を負わないものとします。

1. Official F-Droid repository.¹
   リンク: https://f-droid.org/packages/io.github.muntashirakon.AppManager

2. GitHub repository.
   安定版: https://github.com/MuntashirAkon/AppManager/releases
   デバッグビルド: https://github.com/MuntashirAkon/AppManager/actions

3. Telegram.
   安定版: https://t.me/AppManagerChannel
   デバッグビルド: https://t.me/AppManagerDebug

1.3.2 ソースコードへのリンク

GitHub以外はそのミラーです。タグは常に最新であるべきですが、masterブランチが最新であることは保証されていません。 masterブランチのクローンを作成することが目的であれば、他のリンクではなくGitHubのリンクを使用してください。

1. GitHub: https://github.com/MuntashirAkon/AppManager

2. GitLab: https://gitlab.com/muntashir/AppManager

3. Codeberg: https://codeberg.org/muntashir/AppManager

4. Riseup: https://0xacab.org/muntashir/AppManager

1.3.3 翻訳

App Managerは、プル/マージリクエストによる翻訳を直接受け付けていません。翻訳は、Weblate を介して自動的に管理されます。 翻訳チームに参加するには、https://hosted.weblate.org/engage/app-manager/をご覧ください。

1.4.1 ビルド手順

ビルド手順は、ソースコードのルートディレクトリにあるBUILDINGファイルに記載されています。

1.4.2 パッチを提出する

現在、GitHub以外のリポジトリはそのミラーであり、これらのサイトで提出されたプル/マージリクエストは受け付けていません。² その代わり、パッチ（.patchファイル）を電子メールに添付して提出することができます。コミットにサインオフを行う必要があります。 詳細は、ソースのルートディレクトリにあるCONTRIBUTINGファイルをご参照してください。

2.1.1 バッチ処理

このページでは、一括操作や複数のアプリケーションに対する操作も可能です。 複数選択モードは、アプリのアイコンをタップするか、リスト内の任意の項目を長押しすることで有効になります。 一度アクティブにすると、アプリの詳細ページを開く代わりに、リストの項目をシングルクリックすることでそのアプリが選択されます。 このモードで、一括操作はページ下部の複数選択メニューに表示されます。次のような操作が含まれます:

• 選択したアプリケーションをプロファイルに追加する

• アプリケーションのバックアップ、リストア、削除

• アプリケーションからのトラッカーをブロックする

• アプリケーションのデータまたはキャッシュを消去する

• アプリケーションの有効化/無効化/強制停止/アンインストール

• App Managerに保存したブロッキングルールをエクスポート

• アプリケーションのバックグラウンド動作を禁止する（Android 7以降）

• APKファイルを AppManager/apks に保存する

• ネット接続ポリシーを適用する

2.1.2 カラーコード

• ライトグレーオレンジ(ライトモード) / 紺色 (ナイトモード) – バッチ処理で選択したアプリ

• 薄い赤色(ライトモード) / 茶色(ナイトモード) – 無効化されたアプリ

• 黄色 – デバッグ可能なアプリ

• オレンジ色の 日付 – アプリはシステムログにアクセス可能

• オレンジ色の UID – 複数のアプリでユーザーIDを共有している

• オレンジ色の SDK – アプリケーションが平文（HTTPなど）のトラフィックを使用している可能性がある

• 赤色の パッケージ名 – データの消去を許可していないアプリ

• 赤色の バックアップ – AppManager に 1 つ以上のバックアップが存在するアンインストールされたアプリケーション

• オレンジ色の バックアップ – 古いバックアップ,つまり、ベースバックアップにインストールされたアプリケーションの古いバージョンが含まれています

• シアン色の バックアップ – 最新のバックアップ, つまり、ベースバックアップには、インストールされたアプリケーションと同じかそれ以上のバージョンが含まれています

• シアン色の パッケージ名 – 強制停止されたアプリ

• シアン色の バージョン – 非アクティブなアプリ

• マゼンダ – 永続的なアプリケーション、つまり、常に実行状態のままです

2.1.3 アプリケーションタイプ

アプリには、ユーザーアプリとシステムアプリがあり、次の接尾辞が付きます:

• X – マルチアーキテクチャをサポートしています

• 0 – アプリにDEXファイルが存在しません

• ° – 休止したアプリ

• # – アプリはシステムに大きなヒープ、すなわち大きな実行時メモリを割り当てるよう要求しています

• ? – アプリは仮想マシンをセーフモードにするよう要求しています

2.1.4 バージョン情報

バージョン名の後には、次の接頭辞が付きます:

• _ – ハードウェアアクセラレーションを使用していません（アプリ内のアニメーションや透明度が壊れる）

• ~ – テストビルドのアプリ

• debug – デバッグ可能なアプリ

2.1.5 オプションメニュー

オプションメニューには、表示されたアプリの並べ替えやフィルタリング、App Manager内外のさまざまなページへの移動に使用できるオプションが いくつか用意されています。

2.2.1 カラーコード

このページで使用している背景色とその意味の一覧です:

• 赤 (ライト) / 紅赤 (ナイト) – Dangerousフラグを持つAppOpsや権限、またはApp Manager内でブロックされたコンポーネントを表します。

• うすだいだい (ライト) / 茶色 (ナイト) – App Managerの外部で無効化されているコンポーネントを表します。

  Note.

  無効とマークされたコンポーネントは、必ずしもユーザーによって無効化されたことを意味するものではありません。 システムによって無効にされているか、マニフェストで無効とマークされている可能性もあります。 無効なアプリケーションのコンポーネントは、システム (および App Manager) によっても無効とみなされます。

• オレンジ (ライト) / うすいオレンジ (night) – トラッカーコンポーネントを表します。

• Soft magenta (day) / very dark violet (night) – 実行中のサービスを表します。

2.2.2 アプリ情報タブ

アプリ情報タブには、アプリケーションに関する一般的な情報が含まれています。 また、このタブ内で実行可能な多くのアクションが表示されます。

2.2.3 コンポーネントタブ

アクティビティ、サービス、レシーバ（ブロードキャストレシーバ）、プロバイダ（コンテンツプロバイダ）を合わせてアプリケーションコンポーネントと呼びます。 それらは多くの点で同様の機能を共有しているからです。例えば、それらはすべて名前とラベルを持っています。 コンポーネントは、あらゆるアプリケーションの構成要素であり、そのほとんどはアプリケーションマニフェストで宣言されなければなりません。 アプリケーションマニフェストは、アプリケーション固有のメタデータが格納されるファイルです。 Androidシステムは、メタデータを読み取ることで、アプリケーションで何を行うかを学習します。 これらのタブで使用される色については、§2.2.1で説明しています。 また、オーバーフローメニューのソートオプションを使用して、ブロックされたコンポーネントやトラッカーコンポーネントをリストの上位に表示するよう、 コンポーネントのリストを並び替える機能があります。

2.2.4 権限タブ

App Ops、Uses Permissions、Permissionsタブは、権限に関連しています。 Androidでは、同じID(共有IDとして知られます)を持たないアプリやプロセス間の通信は、しばしばパーミッション（複数可）を必要とします。 これらの権限は、権限コントローラーによって管理されます。 アプリケーションのマニフェストに記載されていれば自動的に付与される通常の権限もありますが、 dangerous、developmentパーミッションはユーザーの確認が必要です。 これらのタブで使用される色については、2.2.1節で説明しています。

2.2.5 署名情報タブ

署名は、実際には署名情報と呼ばれ、アプリケーションは公開する前に、 アプリケーション開発者によって1つ以上の署名証明書によって署名されます。 アプリケーションの完全性（そのアプリケーションが実際の開発者のものかどうか、 他の人によって変更されていないかどうか）は、署名情報を使って確認できます。 なぜなら、アプリケーションを第三者が変更した場合、署名情報は実際の開発者によって秘密にされているため、 元の証明書を使って再び署名することができないからです。 これらの署名はチェックサムで検証することができます。チェックサムは、証明書自体から生成されます。 開発者がチェックサムを提供する場合、署名タブで表示されたチェックサムを照合することができます。 例えば、Github、Telegramチャンネル、IzzyOnDroidのリポジトリからApp Managerをダウンロードした場合、次のSHA256チェックサムをこのタブに表示されるものと照合するだけで、そのアプリケーションが実際に私がリリースしたものかどうか確認することができます:

320c0c0fe8cef873f2b554cb88c837f1512589dcced50c5b25c43c04596760ab

ここに表示されるチェックサムは、MD5、SHA1、SHA256の3種類です。

2.2.6 共有ライブラリタブ

Shared libraries tab lists all the legacy JAR dependencies as well as JNI (Java native interface) libraries. For JNI libraries, it specifies platform (x86/x86_64/ARM/AArch64), architecture (32/64 bit), object type (shared object or executable), etc.

2.2.7 その他のタブ

その他のタブは、機能、設定、共有ライブラリ、署名などのAndroidマニフェストのコンポーネントを一覧表示します。 これらのタブに関する完全な説明は、近日中に公開される予定です。

2.3.1 トラッカーのブロック/ブロック解除

This option can be used to block or unblock the ad/tracker components from the installed applications. On selecting this option, App Manager will ask if it should list trackers from all the applications or only from the user applications. Novice users should avoid blocking trackers from the system applications in order to avoid bad consequences. After that, a multi-choice dialog box will appear where it is possible to exclude one or more applications from this operation. The changes are applied immediately on pressing the block or unblock button.

2.3.2 コンポーネントのブロック…

This option can be used to block certain application components as specified by their signatures. A signature of a component is the full name or partial name of the component. For safety, it is recommended to add a . (dot) at the end of each partial signature, because the underlying algorithm searches and matches the components in a greedy manner. It is also possible to insert more than one signature in which case all the signatures have to be separated by white spaces. Similar to the option above, there is also an option to apply blocking to the system applications.

2.3.3 AppOpsモードの設定…

This option can be used to configure certain applcation operations of all or selected applications. There are two fields. The first field can be used to insert more than one app op constants (either names or values) separated by white spaces. It is not always possible to know in advance about all the app op constants as they vary from device to device and from OS to OS. Desired app op constant can be found in the App Ops tab located in the App Details page. The second field can be used to insert or select one of the modes that will be set against the specified app ops.

2.3.4 バックアップ

1-Click options for back up. As a precaution, it lists the affected backups before performing any operation.

2.3.5 復元

1-Click options for restore. As a precaution, it lists the affected backups before performing any operation.

2.3.6 Trim Caches in All Apps

Delete caches from all applications, including Android system. During this operation, caches of all the running applications may not be cleared as expected.

2.4.1 Options Menu

There are two options menu in this page. The three dots menu in the top-right corner offers two options: presets and import.

• Presets. This option lists a number of built-in profiles that can be used as a starting point. The profiles are generated from the project Universal Android Debloater.
  

  こちらもご覧ください: FAQ: What are bloatware and how to remove them?

• Import. This option can be used to import an existing profile that was previously exported from App Manager.

Long clicking on any profile item brings up another options-menu. It offers the following options:

• Apply now…. This option can be used to apply the profile directly. When clicked, a dialog will be displayed where it is possible to select a profile state. On selecting one of the options, the profile will be applied immediately.

• Delete. Clicking on delete will remove the profile immediately without any warning.

• Duplicate. This option can be used to duplicate the profile. When clicked, a dialog will be displayed where it is possible to set a name for the new profile. On clicking “OK”, profile page will be loaded by duplicating all the configurations that this profile have. However, the profile will not be saved until it is saved manually.

• Export. Export the profile to an external storage. Profile exported this way can be imported via the import option as mentioned above.

• Create shortcut. This option can be used to create a shortcut for the profile. When clicked, there will be two options: Simple and Advanced. When configured with the latter option, it prompts the user to select a profile state when the shortcut is invoked. The former option, on the other hand, always uses the default state that was configured when the profile was last saved.

2.5.1 Options Menu

The three dots menu in the top-right corner opens the options-menu. It contains several options such as–

• Apply. This option can be used to apply the profile. When clicked, a dialog will be displayed where you can select a profile state. On selecting one of the options, the profile will be applied immediately.

  Notice.

  When you apply a profile, if some packages do not match the criteria, they will simply be ignored.

• Save. Save changes to the profile.

  Notice.

  Changes are never saved automatically. You have to save them manually from here.

• Discard. Discard any modifications made since the last save operation.

• Delete. Clicking on delete will remove the profile immediately without any warning.

• Duplicate. This option can be used to duplicate the profile. When clicked, a dialog will be displayed where it is possible to set a name for the new profile. On clicking “OK”, this page will be reloaded by duplicating all the configurations that this profile have. However, the profile will not be saved until it is saved manually.

• Create shortcut. This option can be used to create a shortcut for the profile. When clicked, there will be two options: Simple and Advanced. When configured with the latter option, it prompts the user to select a profile state when the shortcut is invoked. The former option, on the other hand, always uses the default state that was configured when the profile was last saved.

2.5.2 Apps Tab

Apps tab lists the packages configured in this profile. Packages can be added or removed using the plus button located near the bottom of the screen. Packages can also be removed by long clicking on them (in which case, a popup will be displayed with the only option delete).

2.5.3 Configurations Tab

Configurations tab can be used to configure the selected packages.

2.6.1 Language

Configure in-app language. App Manager currently supports 22 (twenty-two) languages.

2.6.2 Appearance

2.6.3 Privacy

2.6.4 Mode of Operation

Mode of operation defines how App Manager works as a whole. It has the following options:

• Auto. Let App Manager decide the suitable option. Although this is the default option, non-rooted users should use the no-root mode.

• Root. Operate App Manager in root mode. App Manager will fall back to no-root mode if root is not detected, or in rare cases when Binder communication through root is disabled (e.g. in Phh SuperUser).

• ADB over TCP. Operate App Manager in ADB mode via ADB over TCP. App Manager will fall back to no-root mode if ADB over TCP is not enabled.

• Wireless debugging. Enable ADB via Wireless Debugging. It will try to connect to the configured port automatically at first. On failure, it will ask the user to either pair or connect to the ADB daemon manually. App Manager will fall back to no-root mode if it fails to connect to the ADB daemon this way.

  Info.

  This option is only displayed in devices running Android 11 or later as Wireless Debugging was introduced in Android 11.

• No-root. Operate App Manager in no-root mode. While App Manager performs better in this mode, all the root- or ADB-specific features will be disabled.

It also displays the currently inferred mode of operation. The actual mode of operations are root, ABD and no-root.

2.6.5 APK Signing

2.6.6 Installer

2.6.7 Back up/Restore

Settings related to back up/restore.

2.6.8 Rules

2.6.9 Advanced

2.6.10 About the device

Display Android version, security, CPU, GPU, battery, memory, screen, languages, user info, etc.

2.7.1 Missing Signatures

At the bottom of the page, there is a special item denoting the number of missing signatures (i.e. missing classes). The missing signatures are the ones that AM has failed to match against any known libraries. The number itself has no particular meaning as many libraries contain hundreds of classes, but clicking on the item will bring up a dialog containing the signatures which is helpful in inspecting the missing signatures. This feature is only intended for people who know what a missing signature is and what to do with it, other users should ignore it.

2.8.1 Intent Filters

Intent filters are used by the applications to specify the tasks they are able to perform or the tasks they are going to perform using other applications. For example, when you’re opening a PDF file using a file manager, the file manager will try to find the applications to open the PDF with. To find the right applications, the file manager will create an Intent with filters such as the MIME type and ask the system to retrieve the applications capable of opening this filter. The system will search through the Manifest of the installed applications to match the filter and list the application components that are able to open this filter (in our case the PDF). At this, either the file manager will open the desired application component all by itself or use a system provided option to open it. If multiple application components are able to open it and no default is set, you may get a prompt where you have to choose the right application component.

http://search.disroot.org/?q=URI%20in%20Android%20scheme&categories=general&language=en-US
https://developer.android.com/reference/android/net/Uri
file:///sdcard/AppManager.apk
mailto:email@example.com
content://io.github.muntashirakon.AppManager.provider/23485af89b08d87e898a90c7e/AppManager.apk

2.8.2 Matching Activities

List all the activity components that matches the Intent. This is internally determined by the system (rather than App Manager). The launch button next to each component can be used to launch them directly from App Manager.

2.8.3 Reset to Default

Reset the Intent to its initial state.

2.8.4 Send Edited Intent

Resend the edited Intent to the destination application. This may open a list of applications where the desired application is needed to be selected. The result received from the target application will be sent to the source application. As a result, the source application will not know if there was a man-in-the-middle.

3.1.1 Enable developer options

3.1.2 Enable USB debugging

After locating the developer options, enable Developer option (if not already). After that, scroll down a bit until you will find the option USB debugging. Use the toggle button on the right-hand side to enable it. At this point, you may get an alert prompt where you may have to click OK to actually enable it. You may also have to enable some other options depending on device vendor and ROM. Here are some examples:

3.1.3 Setup ADB on PC or Mac

In order to enable ADB over TCP, you have to set up ADB in your PC or Mac. Lineage OS users can skip to §3.1.4.1.

cd ~/Downloads && curl -o platform-tools.zip -L \
https://dl.google.com/android/repository/platform-tools-latest-darwin.zip && \
unzip platform-tools.zip && rm platform-tools.zip && cd platform-tools

3.1.4 Configure ADB over TCP

3.1.5 References

1. How to Install ADB on Windows, macOS, and Linux

2. Android Debug Bridge (adb)

3. How to fix USB debugging greyed out?

3.2.1 Enable developer options and USB Debugging

See §3.1.1 and §3.1.2.

3.2.2 Enable Wireless Debugging

In the Developer options page, find Wireless debugging and click to open it. In the new page, turn on Use wireless debugging. Depending on your configuration, you might see a dialog prompt asking you to verify your decision. If that is the case, click Allow.

3.2.3 Pair ADB with App Manager

Keeping the Wireless debugging page open, go to the Recents page either by swiping up or by using the dedicated navigation button, and click on the Settings logo to enable Split screen. It will wait for you to select or launch another application: Launch or select App Manager.

Now, in App Manager and navigate to Settings and then enable Wireless debugging in Mode of operation. After a few moments, App Manager will ask you to either connect or pair ADB. Select pair.

In the Wireless debugging page (now should be on top among the splits), select Pair device with pairing code. At this, a dialog prompt will be displayed. Note down the pairing code but DO NOT close the dialog prompt or the window.

Finally, in App Manager, insert the pairing code and click pair. The port number should be detected automatically. If it cannot, you have to insert the port number as well.

If the pairing is successful, it will display a successful message at the bottom, and the dialog prompt in the Wireless debugging page will be dismissed automatically, and you will be able to see App Manager listed as an ADB client.

3.2.4 Connect App Manager to ADB

App Manager should be able to connect to ADB automatically if the mode of operation is set to auto, ADB over TCP or Wireless debugging. If that is not the case, select Wireless debugging in the settings page. If App Manager fails to detect or connect to ADB, it will display a dialog prompt to connect or pair ADB. Select connect.

Now, navigate to the Wireless debugging page in Android settings, and note down the port number displayed in the page. In App Manager’s dialog prompt, replace the port number with the one that you have noted earlier, and click connect.

Once a connection has been established, you can safely disable Wireless debugging in Android settings.

3.3.1 Location

Back up/restore is a part of batch operations. It is also located inside the options menu in the App Info tab. Clicking on Backup/Restore opens the Backup Options. Backups are located at /storage/emulated/0/AppManager by default. You can configure custom backup location in the settings page in which case the backups will be located at the AppManager folder in the selected volume.

3.3.2 Backup Options

Backup options (internally known as backup flags) let you customise the backups on the fly. However, the customisations will not be remembered for the future backups. If you want to customise this dialog, use Backup Options in the Settings page.

A complete description of the backup options is given below:

• APK files. Whether to back up the APK files. This includes the base APK file along with the split APK files if they exist.

• Internal data. Whether to back up the internal data directories. These directories are located at /data/user/<user_id> and (for Android N or later) /data/user_de/<user_id>.

• External data. Whether to back up data directories located in the internal memory as well as SD Card (if exists). External data directories often contain non-essential app data or media files (instead of using the dedicated media folder) and may increase the backup size. However, it might be essential for some apps. Although it isn’t checked by default (as it might dramatically increase the size of the backups), you may have to check it in order to ensure a smooth restore of your backups.

  Caution.

  Internal data folders should always be backed up if you are going to back up the external data folders. However, it could be useful to back up only the external folders if the app in question downloads a lot of assets from the Internet.

• OBB and media. Whether to back up or restore the OBB and the media directories located in the external storage or the SD Card. This is useful for games and the graphical software which actually use these folders.

• Cache. Android apps have multiple cache directories located at every data directories (both internal and external). There are two types of cache: cache and code cache. Enabling this option excludes both cache directories from all the data directories. It is generally advised to exclude cache directories since most apps do not clear the cache regularly (for some reason, the only way an app can clear its cache is by deleting the entire cache directory) and usually handled by the OS itself. Apps such as Telegram may use a very large cache (depending on the storage space) which may dramatically increase the backup size. When it is disabled, AM also ignores the no_backup directories.

• Extras. Backup/restore app permissions, net policy, battery optimization, SSAID, etc., enabled by default. Note that, blocking rules are applied after applying the extras. So, if an item is present in both places, it will be overwritten (i.e., the one from the blocking rules will be used).

• Rules. This option lets you back up blocking rules configured within App Manager. This might come in handy if you have customised permissions or block some components using App Manager as they will also be backed up or restored when you enable this option.

• Backup Multiple. Whether this is a multiple backup. By default, backups are saved using their user ID. Enabling this option allows you to create additional backups. These backups use the current date-time as the default backup name, but you can also specify custom backup name using the input field displayed when you click on the Backup button.

• Custom users. Backup or restore for the selected users instead of only the current user. This option is only displayed if the system has more than one user.

• Skip signature checks. When taking a backup, checksum of every file (as well as the signing certificate(s) of the base APK file) is generated and stored in the checksums.txt file. When you restore the backup, the checksums are generated again and are matched with the checksums stored in the said file. Enabling this option will disable the signature checks. This option is applied only when you restore a backup. During backup, the checksums are generated regardless of this option.

  Caution.

  You should always disable this option to ensure that your backups are not modified by any third-party applications. However, this would only work if you enabled encryption.

3.3.3 Backup

Backup respects all the backup options except Skip signature checks. If base backups (i.e., backups that don’t have the Backup Multiple option) already exist, you will get a warning as the backups will be overwritten. If Backup Multiple is set, you have an option to input the backup name, or you can leave it blank to use the current date-time.

3.3.4 Restore

Restore respects all the backup options and will fail if APK files option is set, but the backup doesn’t contain such backups or in other cases, if the app isn’t installed. When restoring backups for multiple packages, you can only restore the base backups (see backup section for an explanation). However, when restoring backups for a single package, you have the option to select which backup to restore. If All users option is set, AM will restore the selected backup for all users in the latter case but in the former case, it will restore base backups for the respective users.

3.3.5 Delete Backup

Delete backup only respects All users option and when it is selected, only the base backups for all users will be deleted with a prompt. When deleting backups for a single package, another dialog will be displayed where you can select the backups to delete.

3.4.1 Generating authorization key

In order to ensure proper security, an authorization key is required. To generate a authorization key, go to Settings page and then click Authorization Manager at the bottom. If an authorization key has not been generated, it will be generated automatically. The key can be regenerated as required.

3.4.2 Configuring tasks

The activity io.github.muntashirakon.AppManager.crypto.auth.AuthFeatureDemultiplexer is responsible for handling all the automations. Sending an intent to the activity lets App Manager perform the designated operation by redirecting the Intent to the designated activity or service.

3.4.3 Features

App Manager current support a single feature, namely profile.

3.4.4 Triggering a profile

In order to trigger a profile, feature must have the value profile. In addition, the following extras can be included:

1. prof. (String value – required) The name of the profile as displayed in the Profiles page.

2. state. (String value – optional) State of the profile – currently on or off – as specified in the documentation. If this extra is not set, App Manager will display a prompt where a state must be selected. Therefore, for complete automation, this option should be set.

4.1.1 What are the application components?

Activities, services, broadcast receivers (or only receivers) and content providers (or only providers) are jointly called application components. More technically, they all inherit the ComponentInfo class and can be launched via Intent.

4.1.2 How are the tracker and other components blocked in App Manager? What are its limitations?

App Manager typically blocks application components (or tracker components) using a method called Intent Firewall (IFW), it is superior to other methods such as pm (PackageManager), Shizuku or any other method that uses the package manager to enable or disable the components. If a component is disabled by the latter methods, the application itself can detect that the component is being blocked and can re-enable it as it has full access to its own components. (Many deceptive applications actually do this in order to keep the tracker components unblocked.) On the other hand, IFW is a true firewall and the application cannot detect if its components are being blocked. App Manager uses the term block rather than disable for this reason.

Even IFW has some limitations which are primarily applicable for the system applications:

• The application in question is whitelisted by the system i.e. the system cannot function properly without these applications and may cause random crashes. These applications include but not limited to Android System, System UI, Phone Services. They will continue to work even if they are disabled or blocked.

• Another system application or system process has activated a specific component of the application in question via interprocess communication (IPC). In this case, the component will be activated regardless of blocking status or even if the entire application is disabled. If there is such a system application that is not needed, the only way to prevent it from running is by getting rid of it.

4.1.3 Does app components blocked by other tools retained in App Manager?

No. But the application components blocked by the system or any other tools are displayed in the component tabs. These rules can be imported from Settings. However, it is not possible for App Manager to distinguish the components blocked by the third-party tools and components blocked by the system. Therefore, the applications listed in the import page should be selected with care.

4.1.4 What happens to the components blocked by App Manager which were previously blocked by other tools?

App Manager blocks the components again if requested. In case of unblocking, they will be reverted to the default state as specified in the manifest of the application. But if the components were blocked by MyAndroidTools (MAT) with IFW method, they will not be unblocked by App Manager as it uses a different format. To fix this issue, the rules have to be imported from Settings at first, in which case MAT’s configurations will be permanently removed.

4.1.5 What is instant component blocking?

When you block a component in the App Details page, the blocking is not applied by default. It is only applied when you apply blocking using the Apply rules option in the top-right menu. If you enable instant component blocking, blocking will be applied as soon as you block a component. If you choose to block tracker components, however, blocking is applied automatically regardless of this setting. You can also remove blocking for an application by simply clicking on Remove rules in the same menu in the App Details page. Since the default behaviour gives you more control over applications, it is better to keep instant component blocking option disabled.

4.1.6 Tracker classes versus tracker components

All application components are classes but not all classes are components. In fact, only a few of the classes are components. That being said, scanner page displays a list of trackers along with the number of classes, not just the components. In all other pages, trackers and tracker components are used synonymously to denote tracker components, i.e. blocking tracker means blocking tracker components, not tracker classes.

4.2.1 再起動するたびにTCP経由のADBを再度有効にしなければなりませんか？

残念ながらそうです。しかしv2.5.13以降では、サーバー・クライアント方式によりシステムと対話的に動作するため、 TCP経由のADBを常に有効にしておく必要はありません。但し開発者向けオプションの USBデバッグを有効にしておく必要があります。そのためには、TCP経由のADBを有効にした状態でApp Manager を起動してください。そうすると、ADBモードで動作中とトースト通知が画面下部に表示されます。その後はTCPサーバーを停止させて構いません。 Lineageやその派生システムではTCP経由のADBをPCなしでも切り替えできます。 ネットワーク経由のADB オプションがUSBデバッグオプションの下部に存在します。但し後者の場合ではTCPサーバーを停止できません。

4.2.2 USBデバッグを有効にできません。どうすればよいですか？

チャプター 3の§3.1.2をご確認ください。

4.2.3 ADBモードでもトラッカーやその他のアプリコンポーネントをブロックすることができますか？

残念ながらできません。ADBでは限られた 権限 しか利用できず、アプリのコンポーネント制御はこの中に含まれません。

4.2.4 ADBモードではどのような機能が利用できますか？

ADBモードではAppManagerの殆どの機能が利用でき、ADBモードが検出された際、自動的に有効になります。 アプリを無効化、強制停止、データーを消去、AppOpsやアプリ権限を拒否/許可などの機能も含まれます。 またアプリを確認画面無しでインストールしたり、 実行中のアプリ/プロセスの確認も可能です。

4.3.1 I don’t use root/ADB. Am I completely safe from any harms?

Yes. AM cannot modify any system settings without root or ADB.

4.3.2 How are the trackers and libraries are updated?

Trackers and libraries are updated manually before making a new release.

4.3.3 Are APKs deleted after installed?

No, APKs aren’t deleted by App Manager after they are installed.

4.3.4 Any plans for Shizuku?

App Manager’s use of hidden API and privileged code execution is now much more complex and cannot be integrated with other third party apps such as Shizuku. Here are some reasons for not considering Shizuku (which now has Apache 2.0 license) for App Manager:

1. Shizuku was initially non-free which led me to use a similar approach for App Manager to support both root and ADB

2. App Manager already supports both ADB and root which in some cases is more capable than Shizuku

3. Relying on a third-party app for the major functionalities is not a good design choice

4. Integration of Shizuku will increase the complexity of App Manager.

4.3.5 What are bloatware and how to remove them?

Bloatware are the unnecessary apps supplied by the vendor or OEM and are usually system apps. These apps are often used to track users and collect user data which they might sell for profits. System apps do not need to request any permission in order to access device info, contacts and messaging data, and other usage info such as your phone usage habits and everything you store on your shared storage(s).

The bloatware may also include Google apps (such as Google Play Services, Google Play Store, Gmail, Google, Messages, Dialer, Contacts), Facebook apps (the Facebook app consists of four or five apps), Facebook Messenger, Instagram, Twitter and many other apps which can also track users and/or collect user data without consent given that they all are system apps. You can disable a few permissions from the Android settings but be aware that Android settings hides almost every permission any security specialist would call potentially dangerous.

If the bloatware were user apps, you could easily uninstall them either from Android settings or AM. Uninstalling system apps is not possible without root permission. You can also uninstall system apps using ADB, but it may not work for all apps. AM can uninstall system apps with root or ADB (the latter with certain limitations, of course), but these methods cannot remove the system apps completely as they are located in the system partition which is a read-only partition. If you have root, you can remount this partition to manually purge these apps but this will break Over the Air (OTA) updates since data in the system partition has been modified. There are two kind of updates, delta (small-size, consisting of only the changes between two versions) and full updates. You can still apply full updates, but the bloatware will be installed again, and consequently, you have to delete them all over again. Besides, not all vendors provide full updates.

Another solution is to disable these apps either from Android settings (no-root) or AM, but certain services can still run in the background as they can be started by other system apps using Inter-process Communication (IPC). One possible solution is to disable all bloatware until the service has finally stopped (after a restart). However, due to heavy modifications of the Android frameworks by the vendors, removing or disabling certain bloatware may cause the System UI to crash or even cause bootloop, thus, (soft) bricking your device. You may search the web or consult the fellow users to find out more about how to debloat your device.

From v2.5.19, AM has a new feature called profiles. The profiles page has an option to create new profiles from one of the presets. The presets consist of debloating profiles which can be used as a starting point to monitor, disable, and remove the bloatware from a proprietary Android operating system.

5.1.1 Background

AM currently supports blocking activities, broadcast receivers, content providers, services, app ops and permissions, and in future I may add more blocking options. In order to add more portability, it is necessary to import/export all these data.

Maintaining a database should be the best choice when it comes to storing data. For now, several tsv files with each file having the name of the package and a .tsv extension. The file/database will be queried/processed by the RulesStorageManager class. Due to this abstraction, it should be easier to switch to database or encrypted database systems in future without changing the design of the entire project. Currently, All configuration files are stored at /data/data/io.github.muntashirakon.AppManager/Files/conf.

5.1.2 Rules File Format

    <name> <type> <mode>|<component_status>|<is_granted>

    <package_name> <component_name> <type> <mode>|<component_status>|<is_granted>

6.1.1 Android 13 support

App Manager now targets Android 13 which means most issues in Android 12 and 13 has been addressed, including SSAID and SAF issues as well as monochrome icons and other theming issues.

6.1.2 Introducing freeze/unfreeze

Enable/disable is replaced with freeze/unfreeze to allow greater control on the behaviours of an app. It supports suspend, disable and hide functionalities which can be controlled at Settings > Rules > Default freezing method. In order to make it easy to freeze or unfreeze an app, shortcuts can also be created from the App Info tab by long clicking on the freeze or unfreeze button.

6.1.3 Export app list

In the Main page, it is now possible to export the list of apps in either XML or Markdown format using batch operations. In the future, the XML file may also be imported to App Manager.

6.1.4 Elliptic Curve Crypography (ECC)

App Manager now fully supports encrypting backups using ECC in addition to offering AES, RSA and OpenPGP.

6.1.5 New languages

Two new languages are added: Korean and Romanian.

6.1.6 More list options

In the main page, more sorting and filtering options are added. Sorting options include sorting the apps by total size, total data usage, launch count, screen time and last usage time. Filtering options include filtering the apps having at least one item in the Android KeyStore, filtering apps with URIs granted via SAF, and filtering apps with SSAID.

6.1.7 Improved handling of mode of operation

Fixed various issues with ADB pairing, handled incomplete USB debugging. Some rooting methods cannot allow interprocess communication via Binder. In those cases, ADB mode is used as a fallback method by enabling it automatically if possible.

6.1.8 Handling multiple users

When possible, App Manager will be able to display apps from work profile in no-root mode in addition to allowing basic operations such as launching the app or navigating to the system settings. For backups, it is now possible to restore backups for other users, but for work profile, some apps may only work properly after re-enabling the work profile. In the installer page, selecting All users will now install the app for all users instead of only the current user. Finally, in the app info tab, current app can be installed in another profile using the Install for… option available in the three-dots menu. This is analogous to the pm install-existing command, thereby, making the installation process a lot faster.

6.1.9 Explorer enhancements

Explorer can now open DEX and JAR files in addition to APK files. Several sorting options as well as folder options are also added as the list options.

6.1.10 New tag: WX

In app info tab, a new tag called WX is added. It is displayed in Android 10 and later if the application targets Android 9 or earlier. It indicates W^X violation which allows the app to execute arbitrary executable files either by the modification of executables embedded within the app or by downloading them from the Internet.

6.1.11 App ops management

App ops are now managed automatically to avoid various app ops related crashes in various platforms. This will also lessen the amount of crashes in an unsupported operating system.

6.1.12 Batch uninstallation

In the Main page, enabled batch uninstallation in no-root mode.

6.1.13 Running apps

Enabled advanced searching. Searching now matches not only app labels but also package names.

6.1.14 Interceptor

Copy the intercepted Intent as am command which can be run from either an ADB shell or a terminal using root with the same effectiveness.

6.1.15 Device-specific changes

6.1.16 Others

• Improved Java-Smali conversion by including all the subclasses during conversion

• Improved scanning performance in the Scanner page

• Improved updating the list of apps in the Main page

• Scan all the available paths to detect systemless-ly installed system apps

• vacuum SQLite database before opening it for viewing or editing.

6.2.1 Material 3 and More

Material 3, somewhat similar to Material You, is a significant improvement over Material Design 2 with support for dynamic colours in Android 12 and later. In addition, many design changes have been made in App Manager without any significant changes in the overall user experience.

6.2.2 Wireless Debugging

Wireless debugging support has been fully implemented. Head over to §3.2 for instructions on how to configure wireless debugging.

6.2.3 Languages

App Manager is fully translated into Indonesian and Italian languages and can be enabled in settings. Bengali is removed due to lack of translators.

6.2.4 Introducing App Explorer

App Explorer can be used to browse the contents of an application. This includes binary XML files, DEX contents or any other media files. DEX contents can only be explored in Android Oreo (Android 8) and later. It’s also possible to convert an .smali file into .java for a better understanding of the reversed code. This feature, if not needed, can be disabled in Settings > Enable/disable features.

6.2.5 Import Backups from Other Applications

It is possible to import backups from discontinued or obsolete applications such as Titanium Backup, OAndBackup and Swift Backup (version 3.0 to 3.2). Go to Setting > Backup/restore to find this option.

6.2.6 VirusTotal

VirusTotal is a widely used tool to scan files and URLs for viruses. In the scanner page and in the running apps page, an option to scan files with VirusTotal has been added. But the option is hidden by default. To enable the option, it is necessary to obtain an API key from VirusTotal. Go to Settings > VirusTotal API Key for more information.

6.2.7 Trigger Profiles from the Automation Software

As the implementation of routine operations is being delayed, an option to trigger profiles from the external automation software is added. See §3.4 for instructions on how to configure profile automation.

6.2.8 Improved Application Installer

Application installer includes several improvements including the ability to downgrade applications in no-root mode, installing multiple applications at once and blocking trackers after installation. In Android 12 and later, no-root users can update applications without any user interactions.

6.2.9 Component Blocking

It is now possible to configure how App Manager should block a component. Visit Settings > Rules > Default blocking method for more information. In the components tab, long clicking the block/unblock button opens a context menu which allows per-component blocking in a similar manner. ADB users can also block the components of a Test only app.

6.2.10 Advanced Searching

In some pages, the search bar supports additional searching which includes searching via prefix, suffix or even regular expressions. In the main page, it is also possible to search for applications using the first letters of each word, e.g. App Manager can be listed by searching for am.

6.2.11 Shared Libraries

Shared libraries tab has received a significant improvements. It can display three types of libraries, such as native, jar and APK files.

6.2.12 Make the Best Use of Interceptor

Activity interceptor can be opened directly from the activities tab by long clicking on the launch button, and similarly, activities can be launched from the activity interceptor page with or without root, for any users.

6.2.13 Widget: Screen Time

Screen time widget is quite similar to Digital Wellbeing’s widget by the same name. It displays the total screen time for the day along with the top three apps from all users.

6.2.14 Widget: Clear Cache

Clear cache widget can be to clear cache from all the applications directly from the home screen.

6.3.1 Introducing Backups

Back up/restore feature is now finally out of beta! Read the corresponding guide to understand how it works.

6.3.2 Introducing Log Viewer

Log viewer is essentially a front-end for logcat. It can be used to filter logs by tag or pid (process ID), or even by custom filters. Log levels AKA verbosity can also be configured. You can also save, share and manage logs.

6.3.3 Lock App Manager

Lock App Manager with the screen lock configured for your device.

6.3.4 Extended Modes for App Ops

You can set any mode for any app ops that your device supports, either from the 1-click ops page or from the app ops tab.

6.3.5 New Batch Ops: Add to Profile

You can now easily add selected apps to an existing profile using the batch operations.

6.3.6 App Info: Improved

App info tab now has many options, including the ability to change SSAID, network policy (i.e. background network usage), battery optimization, etc. Most of the tags used in this tab are also clickable, and if you click on them, you will be able to look at the current state or configure them right away.

6.3.7 Advanced Sort and Filtering Options in the Main Page

Sort and filter options are now replaced by List Options which is highly configurable, including the ability to filter using profiles.

6.3.8 About This Device

Interested in knowing about your device in just one page? Go to the bottom of the settings page.

6.3.9 Enable/disable Features

Not interested in all the features that AM offers? You can disable some features in settings.

6.3.10 New Languages

AM now has more than 19 languages! New languages include Farsi, Japanese and Traditional Chinese.

6.3.11 Signing the APK Files

You can now import external signing keys in AM! For security, App Manager has its own encrypted KeyStore which can also be imported or exported.

6.3.12 New Extension: UnAPKM

Since APKMirror has removed encryption from their APKM files, it’s no longer necessary to decrypt them. As a result, the option to decrypt APKM files has been removed. Instead, this option is now provided by the UnAPKM extension which you can grab from F-Droid. So, if you have an encrypted APKM file and have this extension installed, you can open the file directly in AM.

6.4.1 Introducing Profiles

Profiles finally closes the related issue. Profiles can be used to execute certain tasks repeatedly without doing everything manually. A profile can be applied (or invoked) either from the Profiles page or from the home screen by creating shortcuts. There are also some presets which consist of debloating profiles taken from Universal Android Debloater.

6.4.2 The Interceptor

Intent Intercept works as a man-in-the-middle between source and destination, that is, when you open a file or URL with another app, you can see what is being shared by opening it with Interceptor first. You can also add or modify the intents before sending them to the destination. Additionally, you can double-click on any exportable activities in the Activities tab in the App Details page to open them in the Interceptor to add more configurations.

6.4.3 UnAPKM: DeDRM the APKM files

When I released a small tool called UnAPKM, I promised that similar feature will be available in App Manager. I am proud to announce that you can open APKM files directly in the App Info page or convert them to APKS or install them directly.

6.4.4 Multiple user

App manager now supports multiple users! For now, this requires root or ADB. But no-root support is also being considered. If you have multiple users enabled and click on an app installed in multiple profiles, an alert prompt will be displayed where you can select the user.

6.4.5 Vive la France!

Thanks to the contributors, we have one more addition to the language club: French. You can add more languages or improve existing translations at Weblate.

6.4.6 Report crashes

If App Manager crashes, you can now easily report the crash from the notifications which opens the share options. Crashes are not reported by App Manager, it only redirects you to your favourite Email client.

6.4.7 Android 11

Added support for Android 11. Not everything may work as expected though.

6.4.8 App Installer Improvements

6.5.1 App Installer

As promised, it is now possible to select splits. AM also provides recommendations based on device configurations. If the app is already installed, recommendations are provided based on the installed app. It is also possible to downgrade to a lower version without data loss if the device has root or ADB. But it should be noted that not all app can be downgraded. Installer is also improved to speed up the installation process, especially, for root users. If the app has already been installed and the new (x)apk(s) is newer or older or the same version with a different signature, AM will display a list of changes similar to What’s New before prompting the user to install the app. This is useful if the app has introduced tracker components, new permissions, etc.

6.5.2 Scanner: Replacement for Exodus Page

Exodus page is now replaced with scanner page. Scanner page contains not only a list of trackers but also a list of used libraries. This is just a start. In the future, this page will contain more in depth analysis of the app.

6.5.3 Introducing System Config

System Config lists various system configurations and whitelists/blacklists included in Android by either OEM/vendor, AOSP or even some Magisk modules. Root users can access this option from the overflow menu in the main page. There isn’t any official documentation for these options therefore it’s difficult to write a complete documentation for this page. I will gradually add documentations using my own knowledge. However, some functions should be understandable by their name.

6.5.4 More Languages

Thanks to the contributors, AM now has more than 12 languages. New languages include Bengali, Hindi, Norwegian, Polish, Russian, Simplified Chinese, Turkish and Ukrainian.

6.5.5 App Info Tab

More tags are added in the app info tab such as KeyStore (apps with KeyStore items), Systemless app (apps installed via Magisk), Running (apps that are running). For external apk, two more options are added namely Reinstall and Downgrade. Now it is possible to share an apk via Bluetooth. For system apps, it is possible to uninstall updates for root/ADB users. But like the similar option in the system settings, this operation will clear all app data. As stated above, exodus has been replaced with scanner.

6.5.6 Navigation Improvements

It’s now relatively easy to navigate to various UI components using keyboard. You can use up/down button to navigate between list items and tab button to navigate to UI components inside an item.

6.5.7 Running Apps Page

It is now possible to sort and filter processes in this tab. Also, the three big buttons are replaced with an easy-to-use three dot menu. Previously the memory usage was wrong which is fixed in this version.

6.5.8 Built-in Toybox

Toybox (an alternative to busybox) is bundled with AM. Although Android has this utility built-in from API 23, toybox is bundled in order to prevent buggy implementations and to support API < 23.

6.5.9 Component Blocker Improvements

Component blocker seemed to be problematic in the previous version, especially when global component blocking is enabled. The issues are mostly fixed now.

6.5.10 Improvements in the App Details Page

Value of various app ops depend on their parent app ops. Therefore, when you allow/deny an app op, the parent of the app op gets modified. This fixes the issues some users have been complaining regarding some app ops that couldn’t be changed.

If an app has the target API 23 or less, its permissions cannot be modified using the pm grant … command. Therefore, for such apps, option to toggle permission has been disabled.

The signature tab is improved to support localization. It also displays multiple checksums for a signature.

6.5.11 App Manifest

Manifest no longer crashes if the size of the manifest is too long. Generated manifest are now more accurate than before.

6.6.1 Bundled App (Split APK)

Bundled app formats such as apks and xapk are now supported. You can install these apps using the regular installation buttons. For root and adb users, apps are installed using shell, and for non-root users, the platform default method is used.

6.6.2 Direct Install Support

You can now install APK, APKS or XAPK directly from your favourite browser or file manager. For apps that need updates, a What’s New dialog is displayed showing the changes in the new version.

6.6.3 Remove All Blocking Rules

In the Settings page, a new option is added which can be used to remove all blocking rules configured within App Manager.

6.6.4 App Ops

• App Ops are now generated using a technique similar to AppOpsX. This should decrease the loading time significantly in the App Ops tab.

• In the App Ops tab, a menu item is added which can be used to list only active app ops without including the default app ops. The preference is saved in the shared preferences.

6.6.5 Enhanced ADB Support

ADB shell commands are now executed using a technique similar to AppOpsX (This is the free alternative of AppOps by Rikka.). This should dramatically increase the execution time.

6.6.6 Filtering in Main Page

Add an option to filter apps that has at least one activity.

6.6.7 Apk Backup/Sharing

Apk files are now saved as app name_version.extension instead of package.name.extension.

6.6.8 Batch Ops

• Added a foreground service to run batch operations. The result of the operation is displayed in a notification. If an operation has failed for some packages, clicking on the notification will open a dialog box listing the failed packages. There is also a Try Again button on the bottom which can be used to perform the operation again for the failed packages.

• Replaced Linux kill with force-stop.

6.6.9 Translations

Added German and Portuguese (Brazilian) translations.

6.6.10 App Data Backup

Install app only for the current user at the time of restoring backups. Support for split apks is also added.

Data backup feature is now considered unstable. If you encounter any problem, please report to me without hesitation.

7.3.1 OP_* Constants

OP_* are the integer constants starting from 0. OP_NONE implies that no operations are specified whereas _NUM_OP denotes the number of operations defined in OP_* prefix. While they denote each operation, the operations are not necessarily unique. In fact, there are many operations that are actually a single operation denoted by multiple OP_* constant (possibly for future use). Vendors may define their own op based on their requirements. MIUI is one of the vendors who are known to do that.

public static final int OP_NONE = -1;
public static final int OP_COARSE_LOCATION = 0;
public static final int OP_FINE_LOCATION = 1;
public static final int OP_GPS = 2;
public static final int OP_VIBRATE = 3;
...
public static final int OP_READ_DEVICE_IDENTIFIERS = 89;
public static final int OP_ACCESS_MEDIA_LOCATION = 90;
public static final int OP_ACTIVATE_PLATFORM_VPN = 91;
public static final int _NUM_OP = 92;

Whether an operation is unique is defined by sOpToSwitch. It maps each operation to another operation or to itself (if it’s a unique operation). For instance, OP_FINE_LOCATION and OP_GPS are mapped to OP_COARSE_LOCATION.

Each operation has a private name which are described by sOpNames. These names are usually the same names as the constants without the OP_ prefix. Some operations have public names as well which are described by sOpToString. For instance, OP_COARSE_LOCATION has the public name android:coarse_location.

As a gradual process of moving permissions to app ops, there are already many permissions that are defined under some operations. These permissions are mapped in sOpPerms. For example, the permission android.Manifest.permission.ACCESS_COARSE_LOCATION is mapped to OP_COARSE_LOCATION. Some operations may not have any associated permissions which have null values.

As described in the previous section, operations that are configured for an app are stored at /data/system/appops.xml. If an operation is not configured, then whether system will allow that operation is determined from sOpDefaultMode. It lists the default mode for each operation.

7.3.2 MODE_* Constants

MODE_* constants also integer constants starting from 0. These constants are assigned to each operation describing whether an app is authorised to perform that operation. These modes usually have associated names such as allow for MODE_ALLOWED, ignore for MODE_IGNORED, deny for MODE_ERRORED (a rather misnomer), default for MODE_DEFAULT and foreground for MODE_FOREGROUND.

1. MODE_ALLOWED. The app is allowed to perform the given operation

2. MODE_IGNORED. The app is not allowed to perform the given operation, and any attempt to perform the operation should silently fail, i.e. it should not cause the app to crash

3. MODE_ERRORED. The app is not allowed to perform the given operation, and this attempt should cause it to have a fatal error, typically a SecurityException

4. MODE_DEFAULT. The app should use its default security check, specified in AppOpsManager

5. MODE_FOREGROUND. Special mode that means “allow only when app is in foreground.” This mode was added in Android 10

6. MODE_ASK. This is a custom mode used by MIUI whose uses are unknown.

7.3.3 PackageOps

AppOpsManager.PackageOps is a data structure to store all the OpEntry for a package. In simple terms, it stores all the customised operations for a package.

public static class PackageOps implements Parcelable {
    private final String mPackageName;
    private final int mUid;
    private final List<OpEntry> mEntries;
    ...
}

As can be seen in Listing 2, it stores all OpEntry for a package as well as the corresponding package name and its kernel user ID.

7.3.4 OpEntry

AppOpsManager.OpEntry is a data structure that stores a single operation for any package.

public static final class OpEntry implements Parcelable {
    private final int mOp;
    private final boolean mRunning;
    private final @Mode int mMode;
    private final @Nullable LongSparseLongArray mAccessTimes;
    private final @Nullable LongSparseLongArray mRejectTimes;
    private final @Nullable LongSparseLongArray mDurations;
    private final @Nullable LongSparseLongArray mProxyUids;
    private final @Nullable LongSparseArray<String> mProxyPackageNames;
    ...
}

Here:

• mOp: Denotes one of the OP_* constants

• mRunning: Whether the operation is in progress (i.e. the operation has started but not finished yet). Not all operations can be started or finished this way

• mMOde: One of the MODE_* constants

• mAccessTimes: Stores all the available access times

• mRejectTimes: Stores all the available reject times

• mDurations: All available access durations, checking this with mRunning will tell you for how long the app is performing a certain app operation

• mProxyUids: No documentation found

• mProxyPackageNames: No documentation found

7.3.5 Usage

TODO